|
|---|
- Technical
Specifications - Options &
Accessories - Similar
Products - Return &
Warranty - Pros/Cons
Description
1500VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost/cut during brownouts/overvoltages to maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Includes NEMA 5-15P input plug and 8 UPS-supported NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. 2 Year Warranty standard. 3 Year Warranty with product registration.
General Information
| Brand Name | : | Tripp Lite |
|---|---|---|
| Manufacturer | : | Tripp Lite |
| Manufacturer Part Number | : | SMART1500SLT |
| Manufacturer Website Address | : | www.tripplite.com |
| Product Line | : | SmartPro |
| Product Name | : | SmartPro 1500SLT UPS |
| Product Type | : | Line-interactive UPS |
Technical Information
| Plug/Connector Type | : | NEMA 5-15P |
|---|---|---|
| Receptacles | : | 8 x NEMA 5-15R |
Power Description
| Filtering | : | EMI / RFI |
|---|---|---|
| Frequency | : | 60 Hz |
| Input Voltage | : | 110 V AC |
| Input Voltage Range | : | 120 V AC Single-phase |
| Load Capacity | : | 1.50 kVA/950 W |
| Output Voltage | : | 120 V AC Single-phase |
| Waveform Type | : | Sine Wave |
Management
| Alarm | : | On Battery Overload |
|---|---|---|
| Network Management | : | SNMP Manageable Optional |
| Overload Protection | : | 20A input breaker |
Controls/Indicators
| Status Indicators | : | Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. 1 rear panel site wiring fault indicator. |
|---|
Interfaces/Ports
| Interfaces/Ports | : | 1 x DB-9 1 x USB |
|---|---|---|
| Modular Slots | : | 1 x Communications Slot |
Battery Information
| Backup/Run Time | : | 0.10 Hour 1.50 kVA Full Load 0.28 Hour 750 VA Half Load |
|---|---|---|
| Batteries | : | Sealed Lead Acid User Replaceable Hot-swappable |
| Battery Life | : | 3 Year to 6 Year |
| Battery Recharge Time | : | 4 Hour Minimum |
Physical Characteristics
| Depth | : | 16.8" |
|---|---|---|
| Form Factor | : | Tower |
| Height | : | 8.8" |
| Power Cord/Cable | : | 6 ft |
| Weight (Approximate) | : | 47.40 lb |
| Width | : | 6.8" |
Miscellaneous
| Additional Information | : | SMART1500SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 1500VA / 950 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 17 minutes at half load (750VA / 475 watts) and 6 minutes at full load (1500VA / 950 watts) Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91 to 145V Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Residential) Listed 2 year warranty with up to $250,000 connected equipment insurance |
|---|---|---|
| Certifications & Standards | : | UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications |
| System Requirements | : | TYPICAL APPLICATIONS: Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power. |
Warranty
| Limited Warranty | : | 2 Year |
|---|
Package Contents
SmartPro 1500SLT UPS
SMART 1500SLT UPS System
PowerAlert Software CD-Rom
USB and serial cabling
User manual with warranty information
The data and images provided by VISION COMPUTERS under this Agreement have been subjected to numerous control mechanisms to ensure its’ accuracy. At all times, VISION COMPUTERS will use best efforts to maintain its accuracy. However, if at any time the data or images provided are incorrectly priced or below fair market value or availability has substantially changed or image or descriptions contain inaccuracies, VISION COMPUTERS shall not be held responsible or liable, furthermore VISION COMPUTERS reserves the right to reject any orders placed based on this erroneous information.
The data and images provided herein at all times shall remain the property of VISION COMPUTERS or the original Copyright owner. VISION COMPUTERS customers shall take commercially reasonable steps to make sure this data is secured from any unauthorized use, copying or transmission, downloading, or other distribution. Further, this information shall not be used by the VISION COMPUTERS customer for unauthorized purposes.
Connector Cables | |
|
PDUs | |
|
Remote Management Adapters | |
|
Services | ||
|
American Power Conversion Corp | ||||
|
CyberPower Systems, Inc | |||
|
Emerson Network Power | ||
|
IBM Corporation | |
|
Para Systems, Inc | |
|
Tripp Lite | |
|
|






